undefined
Automatic screen printing machine to extend the preservation period of the ink method
Release time:
2023-05-19 17:15
Source:
Automatic screen printing machine as a printing equipment necessary to use to ink, ink is easy to deteriorate at high temperatures, so screen printing machine manufacturers to teach you some of the automatic screen printing machine to extend the preservation period of the ink method.
Automatic screen printing machine to extend the preservation period of the ink method
1, after printing the remaining ink must be sealed and stored in a dark place, in the future production can be reused. Before re-use must first use more than 100 mesh filter, sufficient mixing before mixing with the new ink.
2, in some northern regions, the winter climate is cold, the ink should be prevented from being stored outdoors, to prevent the ink in the low temperature gelling phenomenon. If the ink gel phenomenon, you can transfer it to a higher temperature of the warehouse, or perhaps into the hot water, so that the insoluble material can be restored to its original state.
3, in the ink storage and management should also follow the “first in, first out” principle, that is, the first ink purchased first use, in order to prevent the ink because the storage time is too long and affect its use.
4, the ink is better sealed to prevent dust. A large number of dust particles or a variety of impurity particles are likely to fall into the ink tank or adsorption in the appearance of the labeling material, thus affecting the printing quality.
5, safety a, storage ink should try to stay away from fire, heat, to prevent accidents.
6, ink storage room can maintain a constant temperature, and the temperature difference between the printing workshop can not be too disparate. If the temperature difference between the two is large, the ink should be put into the printing shop early, not only is conducive to the ink performance of the solid, but also to ensure the rate of production.
7, ink also has a certain shelf life, if stored for too long, the ink formula of the various components may occur disintegration, precipitation phenomenon. Therefore, the ink should not be retained for a long time, the general retention period of about 1 year is appropriate, otherwise it may affect the printing quality, and even cause printing failure.
Previous Page
Previous Page
Related recommend
Automatic screen printing machine as a printing equipment necessary to use to ink, ink is easy to deteriorate at high temperatures, so screen printing machine manufacturers to teach you some of the automatic screen printing machine to extend the preservation period of the ink method. Automatic screen printing machine to extend the preservation period of the ink method
Good news: In order to solve the PCB manufacturers high-frequency and high-speed PTFE Teflon plates need high-temperature press (400 degrees) pressing problems, Octopus Alliance business to provide high-frequency and high-speed material pressing (or PCB whole plate) OEM business. Using the only high-precision German Raffa press, the specifications are as follows: maximum size of the pressure plate: 600mm * 700mm
2021-06-29
A listed PCB company in Guangdong seeks to purchase a second-hand washing and drying line, used for PCB press-fit is completed, after the opening and cutting and grinding of copper-clad board cleaning. Buy/sell/rent/maintain electronic equipment, find Octopus;
Dongguan Zhenshun Electromechanical Co., Ltd.
Octopus Digital Power Platform
Headquarters Address: Room 1203, Block A, Building 5, Shenzhen Bay Science & Technology Ecological Park, Yuehai Subdistrict, Nanshan District, Shenzhen, Shenzhen Artificial Intelligence Industry Association
Dongguan Operation Center: Floor 4, Building D, Lian Shang Zhizao Industrial Park, Gaocheng, Dongguan City, Guangdong Province
Telephone:0769-22279273
Fax: 0769-22185259
WeChat: bzy2123n or 18128519506/18102945369
E-mail：sales@youcan-tech.com
Business WeChat